ELECTRIC FENCING
walltop fencing
free standing
A wall-top electric fence is a type of perimeter security system designed to be installed along the top of a wall or fence to prevent intruders from climbing over. It typically consists of a series of electrified wires or tapes that are attached to the wall or fence, and are powered by an electric charger. When someone attempts to climb over the wall, they will come into contact with the electrified wires or tapes, delivering a shock that is designed to deter them from attempting to climb over. Wall-top electric fences are commonly used in high-security applications, such as military bases, government facilities, and correctional institutions.
Freestanding electric fencing, also known as high-tensile wire fencing, is a type of fencing that does not require a physical support structure to hold the wires in place. Instead, the wires are designed to be self-supporting and can withstand the forces of wind and weather without sagging or breaking. This type of fencing is often used for agricultural purposes, such as containing livestock, as well as for perimeter security fencing around properties. It is known for its durability, ease of installation, and cost-effectiveness.
druid d25
The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms. Synchronisation between energizers can be achieved by using traditional network cabling or by the Druid synchronisation modules which use orbiting satellites and eliminate the need for cabling between the energizers.
merlin m28
The Merlin Stealth Dual Zone energizer is a powerful range that can be used for residential to high-end security needs and is a cost-effective solution where more than one zone is required. Separation of the fence into two zones allows easy identification of the zone affected by fence faults or tampering. Smart design allows the maximum amount of energy to be transferred to the zone that needs it, yet the combined energy of the two zones will not exceed the legal maximum permitted. These energizers can be controlled by a tag and/or a keypad and can be programmed to offer customised solutions.
merlin m4
The Merlin 4i includes a keypad for controlling and programming the energizer. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user. This allows the user to control the energizer remotely, with up to four keypads.
wizord 4
Features:
3.7 Joule output energy (single zone)
- Robust and flexible design for home and commercial security
- Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
- Connectable to armed response radio or GSM module
- Lightning and power surge protection
- Intelligent power saving to extend battery life
- Easy-to-use tag included for controlling the energizer
- Powered by 240V mains and includes built-in battery for back-up power
- Built-in gate alarm input to monitor if the gate is open or closed
BRANDS WE USE
CONTACT US
